● Product Properties :
Motor Model : JGB37-555
Power Supply: DC 12V, 24V
Shaft Diameter: 6mm ( D-Shaft )
Speed : 10RPM - 800RPM
● Motor characteristics :
The motor is made of metal materials, which makes it more wear-resistant, does not rust, and prolongs its service life. The gear adopts heat treatment after grinding, which has the advantages of good wear resistance, long life, and low noise. Thickened magnets form a strong magnetic field, thereby increasing the motor torque and preventing signal interference and external transmission. The motor can work continuously for 5000 hours, and the normal operating temperature is 40-60 degrees with a small sound. When the temperature reaches 60, the motor will automatically， maintain a constant temperature protection to prevent the temperature from rising.
● Motor use :
Electric oven, medical equipment, automatic mahjong machine, instrumentation, paper shredder, paper printer.
● Precautions for motor use :
1. Make sure that the motor voltage is correct before use. If it is a DC motor, confirm whether the power supply current is sufficient.
2. It cannot be used with overload. The reason for overload is mainly divided into two parts: torque and shaft force. The load torque cannot exceed the rated torque of the motor. The shaft force cannot exceed the axial and radial allowable force of the shaft. After the load is loaded, the measured current of the motor cannot exceed the rated current. Generally, the motor must be equipped with a fuse to avoid overloading the motor.
3. Do not store or operate in a high temperature or humid environment, and do not place it in corrosive gas, which will reduce the effect of the motor.
4. When assembling transmission parts such as gears and pulleys on the motor shaft, don't knock them abnormally when pressing in.
5. When soldering is needed on the motor terminals of the positive and negative electrodes of the power supply, the soldering iron temperature is 340C ± 40C, and the plastic must not be deformed within 3 seconds. Functional decline.
6. When installing the motor, pay attention to whether the screws are too long, and prevent the excessively long screws from hitting the parts inside the motor.
